Reevex062
New Member
Hello,
May anyone please help me with suggestion on how to fix this please? Here is what is wrong, I did an engine swap on my totaled (rear impact so the engine is 100% fine, engine start and everything work fine after the accident) 98 GSR into a 00 GSR shell.
After the swap everything work fine except for the the RPM gauge ( doesnt move at all). Every other gauge (speedometer, fuel, etc...) and lights work on the tachometer...
NOTE: I use my 99 GSR to test, it is working perfectly fine.
Here is what I've tried so far:
1) Took out that gauge and install it into my 99 GSR >>>> everything on the tachometer work fine so I've conclude that its not broken.
2) Thought the Distributor was broken or the dizzy wire was not plug in. >>>> Checked >>> Distributor and wire are working fine >>>>> RPM gauge still doesnt work :frown:
3) check the VSS and everything is plug in correctly and tightly >>>> RPM still dead =.="
Thank you in advance!!!
May anyone please help me with suggestion on how to fix this please? Here is what is wrong, I did an engine swap on my totaled (rear impact so the engine is 100% fine, engine start and everything work fine after the accident) 98 GSR into a 00 GSR shell.
After the swap everything work fine except for the the RPM gauge ( doesnt move at all). Every other gauge (speedometer, fuel, etc...) and lights work on the tachometer...
NOTE: I use my 99 GSR to test, it is working perfectly fine.
Here is what I've tried so far:
1) Took out that gauge and install it into my 99 GSR >>>> everything on the tachometer work fine so I've conclude that its not broken.
2) Thought the Distributor was broken or the dizzy wire was not plug in. >>>> Checked >>> Distributor and wire are working fine >>>>> RPM gauge still doesnt work :frown:
3) check the VSS and everything is plug in correctly and tightly >>>> RPM still dead =.="
Thank you in advance!!!