Samurai_Blue
Yolo Whippin'
Hey i have an ungo sr6000 with remote start uninstalled, i was wondering if anyone has done remote start installs themselves. Is it easy? im totally clueless with electronics. =/
Remote Start Help
- Thread starter Samurai_Blue
- Start date
Samurai_Blue
Yolo Whippin'
anyone??>!?!?!?!?1
Samurai_Blue
Yolo Whippin'
i know the basics of it but i couldnt find any diys or anything online =/ and i have a 5 speedIf your totally clueless = not easy.
Not totally clueless = easy.
94-97 Integra LS remote start install difficulty, on a scale of 1(easy) to 10(hard) = 2.5
P_Ferg
Me
Do you have the bypass module?i know the basics of it but i couldnt find any diys or anything online =/ and i have a 5 speed
TegSox
Super Duper Moderator
Oh yeah, I was assuming it was an auto.
That car is one of the easier cars to attempt your first remote start on. All wires are easy to find and get at, firewall is easy to get through, plenty of room to work in and to mount the brain, no key transponder BS, no factory alarm to deal with, no funky door locks that need relays(Ford), resistors(Chrysler) or diodes(my '05 Civic, lol).
That car is one of the easier cars to attempt your first remote start on. All wires are easy to find and get at, firewall is easy to get through, plenty of room to work in and to mount the brain, no key transponder BS, no factory alarm to deal with, no funky door locks that need relays(Ford), resistors(Chrysler) or diodes(my '05 Civic, lol).
Samurai_Blue
Yolo Whippin'
did some research and tried to comprehend it a little. Might just bite the bullet and have it installed by somoene else =/
TegSox
Super Duper Moderator
Most shop won't install that starter in a manual car. They'll only do a starter in a manual if the starter is made for manuals, like the Compustar remote starter, for legal/liability issues. Also, most shops won't install it unless they're an Ungo dealer to start with. Shops don't like to install brands of starters that they aern't familiar with, because they don't have their technical support available, different starters have different programming procedures. A simple 1-2 hour job can become an all day hassle when you have to fight with equipment you aern't familiar with.
TegSox
Super Duper Moderator
Actually, if you skip doing the hood pin and feel like pulling out the guage cluster and getting your tach signal from there (which I recommend, its easy), you won't need to go through the firewall for anything.
I don't bother doing hood pins anymore, they just end up getting corroded and failing in a year or so anyway.
I don't bother doing hood pins anymore, they just end up getting corroded and failing in a year or so anyway.
Samurai_Blue
Yolo Whippin'
for sure man thats good information thanks alot man!
patrick4588
Integra God
i have the remote start capability on my alarm and chose not to go with it. all it takes is one time to accidently leave it in gear...
Samurai_Blue
Yolo Whippin'
yeha man two of my friends have had that happen to them...i see what you mean man but its just a conveniance =/i have the remote start capability on my alarm and chose not to go with it. all it takes is one time to accidently leave it in gear...