Rear quarter panel dent

[dc2 gsr]

I have a small dent on that is behind my side molding right behind my drivers door. I wanted to know if you can get to that spot by taking the interior panel off or if it is blocked off. I'd rather not take it all the way off to find out you cant get to it and would like to know if someone already knows if I will be able to get in and push it back out.

 

[96LSteg]

if it is not a creasing dent you could always spray canned air on it and then heat it with a blow dryer and it will pop out on its own...just flip the can upside down and spray. If you don't believe check youtube...

 

[dc2 gsr]

what do you mean by creasing dent? and its about 5 or 6 inches diameter

 

[96LSteg]

creasing dent = crease in dent
rounded dent = no crease (a dent that can be pushed out)

 

[2kdb7]

Plungers work well too

 

[3Axis]

^^ Clean over the dented spot on the panel. Wet the lip of the plunger and work the dent out