hondaproof
hondaproof
i just put a new set of billet lowering control arms on the rear of my da.they were made by a machinist a friend of mine knows.he looked over a set of skunk2 or d2,i cant remember which,that my fiend bought for his car.they came out really good.he had his dude anodize them red to.anyway,these control arms cock out my coilovers towrard the wheel about an inch or so more then the oem arms.in not fimiliar with this due to the oem arms i kept on my first da.has anyone installed control arms of a name brand that have done the same thing to their suspension.or if you have any input on the matter please give me a few words.