to remove the rear bumper your going to need to take out the tail lights. you will then see 4 bolts on each side for the section right above the bumper. there you will see i think 8 bolts that go into the frame. chances are they are rusty so i would suggest using some rust mort so you dont break them. there are two bolts on the bottom of the bumper cover so remove those. your gonna need to take the bolts to the mud flaps. there is also one right behind the lisence plate. i am in school for auto body and almost have my ase certification so no i am not taking this out of my ass. if you have any more questions please pm me. also i have just done this with my car.