Putting new axles

[jdmtegg]

So i kinda have an idea on how putting my new axles in but not too sure ...can you guys give me some advice thatd be awesome.

 

[jznsn2u]

Which part? Passenger axle or driver side axle + half shaft?

Jack the car up, take out the brake caliper and rotor. Take off the axle nut, unbolt the suspension fork, slip the axle out. Slip the new one in, align the fork, put the bolt in, then the axle bolt, rotor, caliper, wheel and then take out the jack stand and lower the jack. It's not too hard.

 

[jdmtegg]

Yeah jst my front ones so all gotta do first is jst Jack the car up, take out the brake caliper and rotor. Take off the axle nut, unbolt the suspension fork, slip the axle out. Slip the new one in, align the fork, put the bolt in, then the axle bolt, rotor and caliper

 

[sumfilipinodude]

Click

 

[Aussie]

You don't need to take your caliper and rotor off. All you need to do is take out the strut fork and lower control arm.

 

[DerekLS]

I'm lookin to change mine soon also on my 95' ls auto, on the driver side do you just remove the whole thing from the housing just like the passenger side?!

 

[jdmtegg]

Click

awesome man!!!!!!!!

 

[hidenplanvew]

Have to brake the lower control arm free

 

[chubs]

loosen the axle nut before u lift.

 

[chubs]

loosen the axle nut before u lift.

 

[obama'swhiteson]

or stick a screw driver in the rotor, works great
plus make sure have the right year axles