Putting HID on my DA .

[edwon01]

if i do that will l blind out all the other road users? or is there a way to get make it dimmer

 

[mirrorimg]

Yes you will blind other drivers. Second gen's headlights are reflectors, so they need the halogen bulb's design and output to project onto the road properly. HIDs will create a lot of glare. Its not the brightness, its the fact that the headlight housing cannot control the light scatter.

 

[edwon01]

Yes you will blind other drivers. Second gen's headlights are reflectors, so they need the halogen bulb's design and output to project onto the road properly. HIDs will create a lot of glare. Its not the brightness, its the fact that the headlight housing cannot control the light scatter.

thx buddy . so do u have any recommendation? all i want is white light thats slightly brighrer then the OEM ones

 

[735e32]

He is correct, it is a reflective headlight and scatters everywhere, though i myself have HIDs, im just saying the proper way to put HIDs in your car is if you retro fit some projectors aswell...

If you want a great bulb that is bright and produce a nice white. id recommend:

Nokya Cosmic White bulbs. I personally had these bulbs and i loved them.

 

[insane_one]

ive herd great things about those blubs too. Sylvania (sp?) bulbs are a step up from stock.

 

[edwon01]

haha l got another question . wat fitment does our car carry? H4 or H4H? and hwo many pairs do i need to change them all white?

 

[mirrorimg]

You need a pair of bulbs for low beams, and a pair for high beams. The stock headlight housing should say what bulb type it takes, as I am unfamiliar with G2 bulbs. Some one can probably chime in in the meantime.

 

[edwon01]

thx again man . l like this forum , alots of friendly ppl here . awaiting for housing size cuz i parked my car outside it is hard to check ahha

 

[Ominous G2]

G2s are a dual filament bulb, no need for a seperate bulbs

Do you have one pieces?

 

[735e32]

Stock 3 piece headlights are H4.

JDM one piece headlights are H4H.

 

[edwon01]

well l have done nth to my light yet so l am assuming it is three pieces?

 

[Ominous G2]

Don't forget one piece are plastic too. Easier to polish the inside of the lens for a better retrofit with less scatter.

Not mine.

 

[edwon01]

ok then mine is not one piece ahah but it does looks good , so back to my question how many pairs do i need?

 

[735e32]

1 pair, because our headlights are dual filaments, they are high and low.

 

[edwon01]

oh sorry man i dint realized u ve already mentioned it b4. but damn is hard to believe that each side is only powered by one lightbulb. l mean it is a big head light ahah so l only need 1 box then right?
http://www.amazon.com/dp/B0010XGSQ6/ref=asc_df_B0010XGSQ61260092/?tag=uncategorized-20&creative=394997&creativeASIN=B0010XGSQ6&linkCode=asn