cadebrowndc2
New Member
So to start off, this is my first forum post. That being said i will try as hard as i can to comply with your assistance. If this post is in the wrong area please move as required. ok... story time. last year I bought my 98 B18C1 gs-r. the previous owner put on an aftermarket body kit and bonded everything together, if I could strangle the employee that painted the car I would. Has been nothing but trouble splitting the bondo and getting the needed parts off, the only thing I am keeping of the exterion shell is the quarter panel, so I have to split the side skirts and back bumber off with attention to detail in order to not ruin the quarter panel. ok so anyway, the reason why I am making a post, I have all new headlight and turn signals ill be putting in aswell. when I went to put in the new headlights I noticed that then lower 10mm bolts on the bottom end of the headlights do not match up, there is at least a half inch gap between them. I also relised that the previous owner installed the headlights and did not care thst they didn't match up, therefore every bracket except for one is broken, I was wondering if I had the wrong part or if I am missing something, please help in anyway you can. thankyou