Power locks don't work!

[teggythaillest]

Alright guys so i have a 4 door 95 integra yesterday i go to unlock my car with my alarm and it sounds like it unlocked it when I go to open my door there still lock so I thought that was strange then as my girlfriend goes to open the door it was still locked so I press the button on the door to unlock it and nothing! What could be wrong I already checked the fuses?!

 

[ixcocoyxi]

rip off the door panel and spray wd40 on all the moving parts that deal with locking/unlocking the car.

if that doesnt work, then its the power lock solenoid that went dead and needs replacement. ebay is a good place for this item in question.

 

[teggythaillest]

Ok I'll do that tommorow morning and web I hit the switch you can hear a little noise- can you send me a link to the part on eBay?

 

[Brownie]

Any progress? If not, do you hear the lock actuator trying to lock or unlock? If it's quite try hooking up a multimeter to the power
wire to see if it's even getting the 12volts it need to lock or unlock. If the 12 volts is present, the actuator may be the fault.