Please help resistor box issue

dc2teg09

New Member
I am putting dsm 450s in my car to upgrade fro the 310s that came with my greddy kit problem is im not getting any fuel I looked at a ton of threads on them and I wired it just like they said I ran the four injector wires to the black wires one to each Then I ran the other four wires all together with the red one.Now we have tested and found that the pump is pumping and Im getting fuel at the rail its just not coming out the injectors any suggestions?:twisted: Also im not using the blue box i have a chipped p28 with crome
 

blaketeg

I <3 Boost
I've had 2 different builds with dsm 450's but never ran into a issue

did you wire up the injector clips correct?

and did you check all of the wires on the harness and make sure you have the ground and power wires correct on the box?
 
You must log in or register to reply here.
Top