Piecing together a turbo kit.

[kevin85193]

Piecing together a kit.

Well, the time has come where I shall be boosting my little gs-r.
This is what I have planned so far:

Garrett t3/t4 .57trim 63a/r
TiAL 50mm BOV
TiAL 38mm WG 7psi + Elbow
Blox Turbo Manifold
Johnny Race Car IC
IC Piping (from local NJ guy)
Walbro 255lph Pump
RC 550cc Injectors

Oil Lines
Gauges: ?
Neptune + Tuning
ODB2 to OBD1 Harness
Turbo Timer : ?
Boost Controller (blitz)
Vac Mani
OBD1 ECU:
Dumptube:
DownPipe:
Exhaust: 3" Piping into aftermarket muffler

Estimate with everything it's going to be $2500-$3000 :suprise:

Looking to be done, latest, next Oct.

What do you think?
Looking at 250-300 8-10psi on stock block :twisted:

 

[Integ1998]

so far it sounds cool. But i think that a 3in. exhaust is a little to big. on my integ i have a 2 1/2in.

 

[Integ1998]

so far it sounds cool. But i think that a 3in. exhaust is a little to big. on my integ i have a 2 1/2in.

never mind what i said about the exhaust u are running turbo so what u said is cool.

 

[inline4four]

fairly good parts. damn good TiAL parts!! what do yuo plan on tuning with? is that what the neptune thing was? I have never heard of neptune. as for guages, for the boost you plan on, autometer would be fine. goo to see that you are planning on using 550's and tuning it. good job

 

[kevin85193]

Yeah, not a lot of people know about neptune. It's only in a few states. I have to travel 1hr 30 to get it tuned, but its well worth it.

http://www.hrtuning.com/index.php?page=neptunefeatures

 

[DC2LSVTEC]

check out ebay if you're having problems finding parts, if you haven't already, you'll be surprised by what you can find for a reasonable price, I pieced together a custom turbo kit list and the price turned out to be around $2,300-$2,400