PCV Valve hole

teggyboy21

New Member
I recently purchased this valve cover http://cgi.ebay.com/ebaymotors/OBX-JDM-Red-Valve-Cover-94-01-Acura-Integra-GS-LS-RS-SE_W0QQitemZ200302362427QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item200302362427&_trksid=p4506.c0.m245&_trkparms=72:543|65:12|39:1|240:1318 and Its formatted to fit all integras 94-01 rs/ls/gs, It has a plug on the top of the valve cover you can pull out if you have a 97-01 and have to put your PCV in the valve cover...or you can keep the plug in if you have a 94-96. I have a 98 and I need to use this hole for my PCV the issue is that the hole is a little bigger than the one that is on the valve cover I have now and the end of the PCV does not fit snuggly in there. It rests on the top but does not fit snuggly. Could this cause any harm or cause oil leakage? It seems like it could work I just wanted to make sure before going through with putting it on.
 

red98teg

Keep on Truckin
^just get a PCV that fits another car, any car that fits the whole properly they all do the same thing... also make sure the tube that comes off of it is the same size
 

teggyboy21

New Member
The top part of the plug covers the hole but the black bottom part of the PCV does not fit snuggly. Would it still be as efficient?
 


teggyboy21

New Member
I wonder how good these OBX valve covers are. Im kind of worried it might cause some leakage/oil burning probs...serves me right for buying crap off ebay.
 

red98teg

Keep on Truckin
^hahaha true that... but let us know just how bad it turns out to be! ;)
 


teggyboy21

New Member
idk man I'm contemplating just keeping my stock one on there..it kind of sucks because I really wanted a nice looking valve cover instead of this one that has the paint all chipped off and everything but it's not worth risking damage to my vehicle
 
You must log in or register to reply here.
Top