OMFG another RATTLE

gotgohan

Apprentice Mechanic
Okay this stupid rattle has been coming and going every freaking day. I am 100% positive its the CV axel but everyone I know say no its the backing plate. I just checked it and its PULLED as far away as possible. I use to get a stupid rattle when I started my Vehicler object and drove it to work then it would be gone half way to work. Its not really like a rattle I suppose it sounds like it is almost hitting the wheel well, but no wear marks.

My thoughts are:
CV Axle
Hub BeariNG?(I never heard a bad hub do this)
Somehow Backing Plate
Or Splsh Shield?

ANY ideas i checked every but the CV axle and the boots are fine so I'm stumped
 

JimmyRos.

07 BMW 328Xi
a rattle is common problem on integra's. it usually leads to the vibration of heat shields or a catalytic converter in need of replacement. check to see if that helps.
 

g2teg

save a whore..buy a porno
if something rattles its loose check everything underneath and tighten them down and go from there
 

mirrorimg

Well-Known Member
Ive got a rattle at certain rpms. Its my exhaust or cat vibrating at a specific frequency that produces the rattle. Its only apparent in a certain gear with X% throttle at X% RPM but it works like clockwork.
 


Top