no spark

bens1990teg

New Member
I have a 1990 acura integra with 211k miles. I had replaced the spark plugs and wires and then i didnt drive the car for about a week after doing so. I went to go drive it one day, and it wouldnt start. I had tested for spark and i wasnt getting any. So i replaced the cap and rotor. After that i was still not getting any spark, so i had replaced the main relay.. I am stuck now.. what should i test or replace to fix this issue?
 

Samurai_Blue

Yolo Whippin'
try a known working dizzy, it may be the ignition coil, or the modulator. are any fuses burnt? Also there is a ground for the dizzy on the thermostat housing make suer its tight
 

bens1990teg

New Member
would the fuses for the dizzy be located under the hood? and it just seems weird that it was working when it was parked, and they after a week of sitting, it wouldnt work.
 

emd513

New Member
i did the same thing when i first got my car and found a fuse under the dash blown. think it was the ignition fuse or whatever its called on the block. pretty sure it is a 25 amp
 

bens1990teg

New Member
yes ive triple checked the firing order, and ill watch the video and also double check the fuses as well.
 


Top