no light on my cel

[alanrohan]

my 93 integra dosnt have a code light on the cel how the hell can i check the code besides a scaner

 

[tilegend]

there's a service connector (grey, 2 wires) by the passenger side kick panel, jump that and you'll be able to read the code by counting the blinking CEL lights. long flashes are for the first digit, short flashes for the second.

 

[alanrohan]

no it dosnt even have a light or that little screen my 90 integ has one and i have 3 othere honda cel that have them but this one dosnt. and the conecters are all different to so i cant use one of the old ones. its a 93 ls special edition if that has anything to do with it

 

[tilegend]

the CEL is in the cluster, it will actually blink at the cluster.

also i have to correct myself i believe the connector is green for OBD1.

here's a write up on how to check it.
http://www.g2ic.com/tegtips/engine/13.html

 

[alanrohan]

alright thanks man ill check it out thanks

 

[alanrohan]

well there are 3 sets of wires under the dash one has 2 wires and the others have 3. i wired the one with two but the cheak engin light comes on and stays on till i pull the wire out.