94integrarsedan
New Member
for 65 shot nitrous what size of fuel injectors would work the best my stock injector are leaking and are cams worth it on a b18b1 with header testpipe intake and nitrous???
nitrous fuel injectors and cams
- Thread starter 94integrarsedan
- Start date
speedin
The Transporter
shure... But really for a 65 shot a stock injector is plenty. I ran a 75 wet with a 100% stock B18B. Took it like a champ. Just need to retard the timing and have colder plugs thats all.8urcivic said:some rc 550cc injectors from me for 200 shipped. nib.
spikehairboy
Non-Registered User
you going to tune your set up? how about how much $ u got to spend?
bottlejunkie
New Member
for a 65 shot you only need to run 1 step colder on the plugs, and retard the timing 2 degrees to be safe.
im running a 55 dry shot, rocket motorsports cams (very mild regrinds), and some bolt ons, and im nowhere near maxed on the injectors. if your injectors are leaking get new o-rings, a good idea if you plan to run a dry shot where fuel pressure will be bumped anyways.
i wouldnt say cams are worth the extra money if you plan to spray, basically, the 5-10whp you see from then IMO isnt worth the trouble or money, compared to just going to a 75 shot for free, and dropping timing another degree.
im running a 55 dry shot, rocket motorsports cams (very mild regrinds), and some bolt ons, and im nowhere near maxed on the injectors. if your injectors are leaking get new o-rings, a good idea if you plan to run a dry shot where fuel pressure will be bumped anyways.
i wouldnt say cams are worth the extra money if you plan to spray, basically, the 5-10whp you see from then IMO isnt worth the trouble or money, compared to just going to a 75 shot for free, and dropping timing another degree.