newbie needs help

mybrosride

New Member
Got a couple questions about a 97 Integra LS Coupe....I'm picking up my ride tomorrow, and want to do a couple things to it....

1 - Need to know if RSX (type S) leather seats will swap in with no problem in a 97 LS coupe...I found the seats, and I want to buy them if they'll work - but the seats are ending soon so I hope you guys can give me an answer fairly quick - really do appreciate it much

2 - The car has 15" mesh wheels right now, want to put 16s on it... I THINK the bolt pattern is 5x114.3 or 5x4.50? but not sure... and need to know what offset I would need to be looking for when i get 16s too.

thanks for you help :D
 

Nighthawk

Goes Vroom in the Night
1) RSX seats WILL fit into an Integra (G3), however the rails will not work without heavily modifying them. By this, you'll have to use the rails from your LS seats and have them welded on to create sort of a hybrid rail so you can bolt the seats down. I know there is a step by step guide for what's all involved on Honda-Tech....but I havent been on there in over a year.

2) LS wheels are 4x100...you'll want to buy wheels with the same pattern. 4x114 or any 5 lug wheel will not go onto an LS. As for the offset, it totally depends on how flush you want the wheel to sit with your fender. If your getting a 16x7 wheel, I'd recommend a 40mm offset.
 
You must log in or register to reply here.
Top