new parts just in!!!!! but with ?s

[dateg88]

So I just got a edelbrock Victor x intake manifold and a 68 mm throttle body for the b18c and was wondering wat kind of HP/tq gains I could be looking at from these bolt ons

 

[JDMxDB8]

Is your engine internally stock or built?

 

[Samurai_Blue]

you are going to need a dyno tune either way, if you are stock you are going to run stupid lean

 

[dateg88]

Internalls r stock but got itr cams but was jw gains if I go get it tuned and all wat I'd be looking at

 

[Samurai_Blue]

not that much more maybe less since theres way too much air going into the motor...the throttle body and intake manifold compliment the internals of the motor. Everything works around the internals.

 

[DailyDB8]

the victor x is for serious builds really, definately need some bigger cams and an aftermarket ecu to get some proper gains. its more or less for a fully built setup, wasn't good for a mild setup like mines.

 

[Samurai_Blue]

victor x is only sutable if taking the rev range to 9+ correct?

 

[dateg88]

victor x is only sutable if taking the rev range to 9+ correct?

It said it was good between 3500 and 8000 so I should send this one back and get something milder if yes do u have any suggestions on brand and model

 

[Samurai_Blue]

neither of those say that on the edlebrok site http://www.edelbrock.com/automotive_new/mc/manifolds/honda/honda.shtml

i suggest for your build a 62mm tb a blox itr styled im and a dyno tune

 

[92gsrboy]

if you plan on doing some serious work in the future....hold on to it...if not def return it and get something a little milder