New motor build problem

[racerx]

I just got my motor done, its realitivly stock, got some different pistons , and a little cam work, this car is raced on a oval track, I just got it running and it sounds like there might be a little miss...i can hear it in the exhaust., my question is since its a little different will the computer still pick up and run the car properly, I mean maybe i can move distributer alittle or something, just kinda wondering if it will be ok with the differnt pistons and grinding of the cams...thanks

 

[mirrorimg]

You should probably take it to a machine shop and have it tuned so that it is running at peak efficiency/performance.

 

[racerx]

mirroring- To a machine shop? they will tune it there? or you mean to a mechanic garage?

 

[BrokenTalon27]

First off, what is the set up? Be specific.
Second, you will have to take the car to a tuner, not a machine shop. Those are 2 different cups of tea.

 

[Samurai_Blue]

You should probably take it to a tuner and have it tuned so that it is running at peak efficiency/performance.

 

[mirrorimg]

Sorry I meant to say performance shop I.e tuner.

 

[racerx]

[First off, what is the set up? Be specific.
Second, you will have to take the car to a tuner, not a machine shop. Those are 2 different cups of tea.
__________________
/QUOTE]

Motor is pretty much stock, I had the cams sent out to get grinding done, to give more duration, and the pistons i think are b16 or close to them, they have more compression, and its bore'd 30 over, 5 angle valve job, and i think it may be shaved a tiny bit. That is all I really can say, because that is what the machine shop told me. thanks

 

[guiltyxxspark]

Get it tuned on Hondata, Chrome, Neptune or soemthing like that. I've always used Hondata.