:2confused ok so im picking up a 99 gsr longblock and im gona put it in my 90 interga i wanted to know what harness do i use for the swap that will match my harnees for the inside any thing would help
You can just get an jumper harness from Boomslang Fabrication or Rywire that has the vtec wires already patched in. That's what I did for mine. Don't forget you'll need a different ECU too.
Where in Texas are you? If you're near Houston there is a shop here you should check out. It's called Secret Services. They do awesome work.
Also, if you're close, Ill give you a hand with your swap if you need.
