TheSickestDC2
Banned
i was driving on the high way and my car was fine coming off the ramp it was also fine, but when i got to the first traffic light i had to stop and the idol went down to like 250 about and stayed low ever since so i pulled over and parked it. checked the oil and everything, everything was fine started it up a few times and then it didn't start anymore tries cranking over, but it doesn't start what do you guys think this can be maybe i am not getting spark or what and the fuel pump turns on so please help i would really appreciate it thanks
okay so i replaced the entire distibutor and new cap and rotor along with plugs and wires and the sparking problem is now fixed. It still wont start it seems like the timing is off and it is about that time for a new timing belt could that not let it start please help thanks in advance
UPDATE: its not the injector because i put injector for cylinder 2 in place of cylinder 4 and put cylinder 4 into cylinder 2 and it is the same thing the spark plug in cylinder 2 is looking brand new, and the plug is still wet on the bottom when i take it out. so what else can this be. i noticed at the corner or the head on the left by the radiator hose there is oil slowly leaking out is it possible i need a new head gasket could the be why cylinder 2 is not working? PLEASE HELP PLEASE HELP
okay so i replaced the entire distibutor and new cap and rotor along with plugs and wires and the sparking problem is now fixed. It still wont start it seems like the timing is off and it is about that time for a new timing belt could that not let it start please help thanks in advance
UPDATE: its not the injector because i put injector for cylinder 2 in place of cylinder 4 and put cylinder 4 into cylinder 2 and it is the same thing the spark plug in cylinder 2 is looking brand new, and the plug is still wet on the bottom when i take it out. so what else can this be. i noticed at the corner or the head on the left by the radiator hose there is oil slowly leaking out is it possible i need a new head gasket could the be why cylinder 2 is not working? PLEASE HELP PLEASE HELP
Last edited: