NA setup ideas

sOuL

New Member
i need some ideas for a set up, im thinkn between a DC 4-1 header and apexi exaust system or a ITR header with apexi exaust system, i want somethin thats gonna give me good gains and responces, i saw a ITR header i liked on robear it said 98 tegs but it should fit my B18C1 GSR right?
http://www.robearracing.com/pd_authentic_jdm_integra.cfm
 
Last edited:

TegSox

Super Duper Moderator
Are you talking about a JDM DC header and a JDM ITR header? Or USDM models?
 


Baldy201

New Member
It is true that the DC Header will fit the GSR along with the ITR. The DC Header is slightly better than that stock ITR due to the welds on the flange that meets the head. Also make sure that you get the ITR exhaust or a longer cat because the header that you have is longer than the header you will be buying.
 

obd1kenobi

CI Transfomer God!
OK guys this is the fitment Guide
07-01 TypeR, 00-01 GSR, 94+01 Ls/Gs/Rs are the same
94-99 GSR, are different, they're shorter, so go from there :)
 

PogKai

B20VTEC
Baldy201 said:
It is true that the DC Header will fit the GSR along with the ITR. The DC Header is slightly better than that stock ITR due to the welds on the flange that meets the head. Also make sure that you get the ITR exhaust or a longer cat because the header that you have is longer than the header you will be buying.
Click to expand...
exactly, that why i havn't installed my DC JDM Race header, it's about 1-2 inches longer than the current one!
 
You must log in or register to reply here.
Top