TeggyBear_Ls
90 EF LS/V 95 DC4
Well after we got the Integra running again last night we noticed it was louder than normall and the wastegate was opening at idle.
So we pinched the vacuum line that goes from the BOV to the IM, and it closed and the idle went back to normal. So waht does that mean, it didn't look like there was a leak anywhere....
I'll probably have to try to clamp that line onto the IM, because it's pretty loose.
So does that mean we've got a vacuum leak, since it stays open like that? When we drove it, it still was hitting boost, but I didn't try to hit max boost to see if it's guna stop building at 5psi or not.
PS I stuck a MBC on it too. A Buddy gave it to us for free one Night when some guys were talking shit about the car and wanted to race for money (But we didn't, racing for money is Stupid.)
I plugged it onto the top port of the wastegate and ran it going to the IM. It's Tee'd off a intake mani vacuum line. In fact, it's Tee'd off the same line that is leaking. But when I pinched that MBC line, it didn't close the wastegate, but when I moved my hand over a couple inches onto the BOV line & pinched it, it closed the wastegate....
I'm confused lol.
Anyone know anything that can help?
So we pinched the vacuum line that goes from the BOV to the IM, and it closed and the idle went back to normal. So waht does that mean, it didn't look like there was a leak anywhere....
I'll probably have to try to clamp that line onto the IM, because it's pretty loose.
So does that mean we've got a vacuum leak, since it stays open like that? When we drove it, it still was hitting boost, but I didn't try to hit max boost to see if it's guna stop building at 5psi or not.
PS I stuck a MBC on it too. A Buddy gave it to us for free one Night when some guys were talking shit about the car and wanted to race for money (But we didn't, racing for money is Stupid.)
I plugged it onto the top port of the wastegate and ran it going to the IM. It's Tee'd off a intake mani vacuum line. In fact, it's Tee'd off the same line that is leaking. But when I pinched that MBC line, it didn't close the wastegate, but when I moved my hand over a couple inches onto the BOV line & pinched it, it closed the wastegate....
I'm confused lol.
Anyone know anything that can help?