my first acura build

[b18bkid]

i just got a 92 da and im lookin for ideas on performance i dont know if i wanna do ls vtec or build it no vtec i wanna do it na maybe a lil nitrous it will be a street car any help will be much apreciated

 

[OGstackadoIIa]

Read through threads and gain some knowledge; this is a very basic question

 

[Samurai_Blue]

each has their pros and cons

 

[b18bkid]

well i have a b18b jdm motor with a sir b16 lsd tranny as a base to start with

 

[Samurai_Blue]

b16 trannys dont respond to boost well

 

[b18bkid]

i would like to stay na

 

[Samurai_Blue]

i suggest researching Ls Vtec/Vtec/B1 builds

 

[myxintegra]

But VTEC is not super good

 

[b18bkid]

im thinkin bout usin a brian crower 2.16l stroker kit with 10.5:1 pistons and im think 100 shot with some brian crower stage 2 n/a cams 28.5mm EXHAUST &31.5mm INTAKE valves 68mm skunk2 throttle body edelbrock victor x intake manifold aem cdi ignition setup and idk what im gonna do for ecu or programming any recomindations

 

[thenoxus1]

Hondata or whatever your tuner likes. You might want a bit higher compression for all motor. I'll be around 11.53:1

 

[b18bkid]

i thought bout 11:1 but with the nitrous idk

 

[thenoxus1]

With stage two cams you'll want higher compression teo get the benefits of them. I'd do nitrous maybe last after a full build.

 

[b18bkid]

ok thanks

 

[thenoxus1]

http://www.team-integra.net/forum/16-forced-induction/28540-nitrous-high-compression.html

 

[b18bkid]

i just did all the math and if i get my head shaved .020" ill have 11.37:1 i should still be able to run pump right