mounting bolt on alternator

[michaelm610]

the weathers finally decent in the city i live in, which is suprising anyways on to the topic i have all off the nuts off of my alternator the stripped ones and all, but now theres only one thing stopping me from getting my car on the road, the huge bolt with the square end holding the alternator on i have taken off the wheel and taken these pictures i want to know what you think of this,

Way up inside where i can not fit a hammer,

The other side of the mounting bolt, the "Square" side

the top where i have removed the stripped nut

it would be a great help and we can soon see another Da9 on the road

 

[jdmjim]

bumer man, the bolltssupose to slied out. try uubollting the braket off with the alt and pound itt out.

 

[mirrorimg]

You can take off the two brackets that it attaches to if you cant get that bolt out of the bottom. You already removed the portion holding the alternater to the top bracket, you now you just need to unbolt the bottom bracket.

There are two bolts holding it in. You can see one in the first picture, the other one is on the other side of it.

 

[michaelm610]

are you talking about right above the trans axel?

 

[mirrorimg]

Yes. Those two bolts hold the mount to the block, without them, the alternator will be free.

I dont think you will be able to fish it down through the bottom of the car. You may need to unbolt the upper bracket, and the fuel rail to get enough room to pull it out the top.