Looking for manual tranny

BrownRacing69

Drive on the Edge
ive been looking every where for a manual tranny. i cant find a good one for a 93 integra gs. i want to know where i could get one and how much it might cost. im tired of my auto.:???:
 

daf

New Member
Do you know exactly what transmission you want? The 2nd gen integras had 2 transmissions with the same name. YS1 is the name for both the LS/GS/RS as well as the GSR, but the ratios are very different. That would be the easiest. You could also find a B16 cable tranny (S4C, S80, Y80, Y21, Y1). Some of those might also be the names of the hydro tranny, I cant remember which is which. Maybe the names will help you out some.
________
The Cigar Boss
 
Last edited:

daf

New Member
Even if he finds a hydro, Innovative makes a nice conversion kit.

http://www.spoolinperformance.com/cable-hydro-hydraulic-actuator-p-362.html
He would also need a speacial mount for it as well. I am dropping an OBD2a B16 in to my DA and ran in to this problem

http://www.innovativemounts.com/ProductDetails.asp?ProductCode=49321

They also make a mechanical actuator that is a ltitle cheaper.

http://www.innovativemounts.com/ProductDetails.asp?ProductCode=41000

And if you find a cable tranny you want, you will still need a new tranny mount as well

http://www.innovativemounts.com/ProductDetails.asp?ProductCode=49321
________
COACH HANDBAGS
 


Last edited:
I hope you realize just how much work is involved in that swap...you'd be better off just pulling all your parts that you want off and getting a car thats factory manual.
 

BrownRacing69

Drive on the Edge
I hope you realize just how much work is involved in that swap...you'd be better off just pulling all your parts that you want off and getting a car thats factory manual.

i know its a lot of work but im willing to do it. i cant find one in my price range. plus i have already got all the paper work and everything else done with it
 
Top