yodapala New Member May 1, 2009 #1 Need a procedure (if there is one) for a 1991 integra. I'm trying to narrow my problem down so I dont buy parts I dont need. Its not fuel related I know that, checked pressures--ok. It might be my distributor or crank trigger, I dont know.
Need a procedure (if there is one) for a 1991 integra. I'm trying to narrow my problem down so I dont buy parts I dont need. Its not fuel related I know that, checked pressures--ok. It might be my distributor or crank trigger, I dont know.
Kuchtaboy Unregistered User May 1, 2009 #2 just pull back the carpet and count the blinks on the red LED on your ECU. ECU is located in the passenger footwell
just pull back the carpet and count the blinks on the red LED on your ECU. ECU is located in the passenger footwell
BrokenTalon27 W.F.O May 2, 2009 #3 I thought with a 91 you had to jump that clip? That's what I have to do with mine.
Ominous G2 ┌∩┐(◣_◢)┌∩┐ May 2, 2009 #4 Nope, 90-91s have the led on the ECU. 92-93 are obd1 so you have to use the clip. This should help http://www.g2ic.com/tegtips/engine/13.html
Nope, 90-91s have the led on the ECU. 92-93 are obd1 so you have to use the clip. This should help http://www.g2ic.com/tegtips/engine/13.html
