Installing Yonaka Exhaust on 4dr LS

[aaks38]

Sorry as i realize there are tons of threads and i read through many of them. I noticed there are some exhaust kits that mention they can fit either a 2dr or 4dr less however Yonakas exhaust is only for the 2 dr LS.

I had a walker catback exhaust but it rusted out after 50k miles, so im trying to find something similar in price and not loud.

If i were to install this kit on the 2 dr, would it essentially fit but the rear taiilpipe wouldnt extend beyond the rear bumper? Ive read you need a 4 inch extension but where would it be needed if you can extend the tailpipe.

Thanks.

 

[bkirshr]

I think the civic coupe catback from 92-95 fits 4 doors without a problem, otherwise yes, you will need an extender pipe

 

[klutchDb7]

It's either the coupe or sedan^ I don't remember which. But yes to both accounts

 

[steve-o_585]

I put a 2 door Integra exhaust on my 4 door, bolted up perfectly, just the rubber hangers got stretched out a little. Even the muffler sits nicely & isnt tucked too far back.

 

[klutchDb7]

Uh, you sure about that? pics?

 

[sinisterDB]

the tailpipe for sedan is longer which is the only difference if im correct the b-pipe for both sedan and coupe should be the same length.

 

[Rattlecan Hero]

If I was going to put an extension on my exhaust, I would put it a few inches after the cat.

 

[jelizondo_20]

Bumping

I talked to Justin from turnsports.com and he said that some people said that 92-95 civic hatchback would probably work. I am wondering if anyone has done this yet??

 

[JayVee]

Interesting thread , I've been looking at the yonaka and they have a good price for full catback . Would like to know about 4drs as well .

Sent from my Desire HD using Tapatalk 2

 

[klutchDb7]

Bumping

I talked to Justin from turnsports.com and he said that some people said that 92-95 civic hatchback would probably work. I am wondering if anyone has done this yet??

no, it comes up far too short

 

[JayVee]

Do they make a 4dr version or just 2dr ?

Sent from my Desire HD using Tapatalk 2

 

[stillhere153]

all you have to do is cut between the tip and the muffler modify that and if needed modify post cat

 

[JayVee]

Would welding an extension alter the sound of the exhaust ?

Sent from my Desire HD using Tapatalk 2

 

[stillhere153]

not if you did the proper size...

 

[JayVee]

And by proper size you mean exact length of OEM ?

Sent from my Desire HD using Tapatalk 2