Installed my JDM sidemarkers

Rich-PMS

New Member
Ordered some sidemarkers last week, and finally got around to installing them today. Here's a few pictures-






I plan to take more pictures tomorrow when I'm at work. It was 42f, windy, and rainy when I installed them today. And when I was done cleaning up it was too dark for good pictures.
 

Samurai_Blue

Yolo Whippin'
looks good man

FYI the "jdm way" to wire them up is to have them off except when you use the turn signal
 

Rich-PMS

New Member
I can't justify spending money on beater wheels...

Yes I took a dremel to them. Super easy :)

as for the "jdm way" IDC, I'm not following trends, or craze- I'm setting my own way of doing things- just look at my hood :)

the weird thing is that the plugs on the sidemarkers were same colored wires as the bulbs in front corner that light/blink.

And marker lights are made to be on all the time actually.

I got them on eBay from a seller who has several sets. 25$ shipped from new Zealand :)
 

Rich-PMS

New Member
Just like I stated- marker lights are meant to be on with parking lights. :)
 


Rich-PMS

New Member
I'm pretty satisfied with them. I had jdm fenders on my MR2, and my 300zx- so I've been wanting to grab a pair of jdm sidemarkers for the integra.

Plus it never hurts to make yourself more visable while driving :)
 

Rich-PMS

New Member
Not hard at all. Used the writeup with step by step pictured instructions. Except I only used the writeup for the measurements.
 

WDEDMON1

New Member
So you wired them to the harness? or is there a way to just plug em up? Wdedmon1=horrible with electrical mods
 
You must log in or register to reply here.
Top