Installed my GC sleeves

Rich-PMS

New Member





Monday I'm going to use spacers and fix my negative camber. Then going to get alignment checked.

I have 1" of adjustment left on the fronts, and 1-3/4" on rears.

I am VERY happy with the ride! I still have to take corner measurements and see of I'm sitting even on each wheel well. I'm also going to drop my whole exhaust and raise the hangers so I get more clearance- as of now I have just a hair over 2" clearance from exhaust pipe to ground.

Also, the DC sideskirts look awesome with the drop :) only thing I want to get is a rear visor, rear mud gaurds, and 92/93 front bumper.

I'll take more pictures tomorrow when I'm at work and post them up :)
 

ixcocoyxi

RS owner
dont use too many washers on the back. if you put too much, there wont be enough thread for the bolt to hold and work its way out. if you need more, get a longer, stronger bolt. if you dont, itll snap.

as for the front, only camber kits can fix it
 

Rich-PMS

New Member
Thanks coy, but Im no newb to suspension ;)


I'm also debating on painting my wheels bronze. Any input?
 


Rich-PMS

New Member
No point in getting wheels right now because I have 2 brand new tires, and winter is coming. I'm debating on 15 or 16 once tax season comes :)
 

j13

Keep It Clean
The dropping of an Integra is like boning a chick for the first time, she's now a grown female lol :thumbs up

Looks good. I would go with 15" wheels though not 16"..

16" wheels on a DA, look like 17" wheels on a DC..too big IMO. Good luck with the future plans.
 

Rich-PMS

New Member
Ilovemy95teggy said:
what in the world is goin on with your hood?!
Click to expand...
Sharpie art. Check my other thread for details and pictures.

Coy, the wheels aren't in the best condition- there's scratches on the face and such. So if I sand then out they won't be as "polished" as they are now. And I definately dont have the time to sand them to a polished finish. That's why I'm thinking of painting them. I'm tired of the black on black everyone has, not a fan of stock wheels painted white, silver/gun metal would clash with the look I'm trying to achive- so that leaves me with bronze/gold.
 

Rich-PMS

New Member
So I took some measurements from ground to center wheel well arch and passenger side is 1/16th of an inch lower than driver side.

I'm going to raise the back 1/4 of an inch and drop the front 1/2 so it sits more agressive instead of basically level
 
You must log in or register to reply here.
Top