SupersonicGSR99
New Member
ok i finally got my turbo kit for my 99 gsr but im planning on getting rc 440's. it says for 96+ i need injector clips? do i need these and what do they do ?
injector clips?
- Thread starter SupersonicGSR99
- Start date
mteg
Automatic Lover
You can order the clips off ebay for about $3 a piece. Make sure that the injectors are saturated, and not peak and hold-otherwise you need to buy a resistor box as well. What are you using for tuning?ok i finally got my turbo kit for my 99 gsr but im planning on getting rc 440's. it says for 96+ i need injector clips? do i need these and what do they do ?
White_Rabbit
New Member
You may need because I believe 94-97 had one style where 98-01 had a different style. Something like that. I put a GSR motor in my LS. I used my old wiring harness and had to change the clips for my 750cc injectors.
SupersonicGSR99
New Member
im planning on using the e-manage blue box. i just got my treadstone/turbonetics kit and i just need to order fuel pump, regulator, injectors, wide band, egt, boost gauge etc
2quickk
New Member
If you're only getting 440cc rc injectors I suggest just getting dsm 450cc injectors. I used them on a boosted gsr hatch @ 8 psi and they worked perfect(could have gone up to like 10 psi). You can find injectors & clips for $120 and a resistor box for $20, compared to $320. Personally, unless i was getting bigger than 440cc injectors i'd just get the dsm injectors. Thats just me though=)