how do you remove this??

[soto2635]

im removing my power steering and im trying to get my facts stra8, i know you have to do the loop on the rack and all that but i now need to know how and where to unhook that big hose that attaches to the top of the powersteering pump its held on by 2 10mm bolts and then runs through the bracket on the upper right hand corner of the valve cover shown is pic in red -}

 

[patrick4588]

that hose goes all the way the power steering rack.

 

[soto2635]

ok does it come off though??? and if it does how do i plug up the opening?? or does something get looped there as well??

 

[patrick4588]

yeaht thats one of the ports you have to loop? do you have money to burn on a kickass AN fitting kit?
http://www.stealthmodeperformance.com/oil-powersteering.shtml

 

[patrick4588]

thats what i have.

 

[soto2635]

no, would i be able to just plug it up with a bolt??

 

[soto2635]

i know u got to loop these 2,

but idk what to do with this one

 

[ltrain]

yeaht thats one of the ports you have to loop? do you have money to burn on a kickass AN fitting kit?
http://www.stealthmodeperformance.com/oil-powersteering.shtml

why not just loop them instead of getting the kit?? i never understood that kit. Im guessing its easier to change PS fluids with it?

 

[soto2635]

im am looping it

 

[patrick4588]

why not just loop them instead of getting the kit?? i never understood that kit. Im guessing its easier to change PS fluids with it?

it uses a reservoir still and the fluid has space to expand so its not hard to turn like it is when you loop the lines.

 

[Spody02]

thats a pretty baller kit

 

[patrick4588]

thats why i run it; im a baller

 

[soto2635]

so does it get harder when u loop it?? and how about the hole were the p/s holes connects w/ the rack?