how do i install a FPR on my b16

[95lsteg]

i am thinking about buying a FPR for my b16 but yet have no clue how to install one. Im not sure the difference from an ebay one to a aem one. I know aem is a better company but they do the same thing. so i looked on ebay... how do i install one like this

they dont include instructions...
http://cgi.ebay.com/ebaymotors/FUEL-PRESSURE-REGULATOR-CIVIC-INTEGRA-D15-D16-B16-B18_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem4145c72b3aQQitemZ280343554874QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[GSROWNSU]

first of all don't by that ebay garbage...you'll end up buying it again and doing it the right way. Why not do it the right way the first time around and save yourself some money and headaches. You don't need an aem one if you don't want to spend a bunch of money. Look into the B&M FPRs. I run one and it was pretty easy to install and works really well. I think they're only like 60 bucks too.

 

[GSROWNSU]

They look very clean and low key too This is mine.

 

[95lsteg]

first of all don't by that ebay garbage...you'll end up buying it again and doing it the right way. Why not do it the right way the first time around and save yourself some money and headaches. You don't need an aem one if you don't want to spend a bunch of money. Look into the B&M FPRs. I run one and it was pretty easy to install and works really well. I think they're only like 60 bucks too.

okay well how would i go about installing that. i hear you use the bottom of your original fpr. like cut the top off and some other stuff... a friend told me