hondata s300 with bluetooth

[death6543]

Ok so i have a 92 integra with a stage 3 clutch new OEM head gasket, new arp head studs,Short shifter, water pump ,thermostat and timeing belt. i do have a turbo kit standing by waiting to be installed but i need/want to upgrade my ecu first with a hondata s300 with bluetooth. my issue is that it will cost a tun of money i was wondering if i could just have a stock base map and not have to get it tuned untell i have enuff of money for the tune when i have my turbo installed.And if i can just run a stock base map and not have to get it tuned would i need to put my wide ban o2 in or wait tell my turbo is in to install the o2?

 

[Aussie]

No really means Yes

 

[Muckman]

Technically he should be able to safely run one of the stock ECU calibrations if he keeps the engine stock - no turbo, stock injectors, MAP, cams, etc. But I am always reluctant to tell anyone not to go to a tuner because next thing you know he will be boosting on the basemap.

 

[Aussie]

I thought he meant he wanted to use a basemap with the turbo installed?

 

[Muckman]

I thought so too at first until I read it a couple of times. Its like a SAT question, the first 2 sentences have nothing to do with the question.

 

[Aussie]

Ah I see, I read it again, I'll have to change that "no."

 

[death6543]

No im not going to run turbo on a stock base map...

 

[death6543]

only engine up grades so far in is cold air, new oem head gasket and arp head studs i just want to know if i could run the hondata ecu with a stock base map or not? and would i need the wideban o2 in or not

 

[Muckman]

Yes to stock basemap (I think I already answered that). And you don't need the wideband. Stock basemap expects a stock narrowband O2 sensor, unless you disable it.