Honda Steering wheel

[Robreeto]

I have seen honda steering wheels on some integra's
i was wondering which steering wheels i could use
like would a civic steering wheel fit mine? or just the airbag?
and if anyone can point me to a site that sells these steering wheels

:]

 

[99Teggy]

im not sure but i think civic n tegra wheels fit just... make sure it comes with airbags dont waste ur time doing them seperately its just a steering wheel..

 

[BigMac88]

Probably a JDM Type R steering wheel.

 

[JDMsneakerz]

search "jdm Si-R" its no airbag black stitching, that the one my buddy has

 

[Samurai_Blue]

Any EG and DC steering wheel will fit. also ek will fit you just have to tighten the shit out of it i dont think it has enough teeth.

 

[4drs=morewhores]

im not sure but i think civic n tegra wheels fit just... make sure it comes with airbags dont waste ur time doing them seperately its just a steering wheel..

Yea that way u wont have the SRS light on, inless that doesnt bother u

Those type r steering wheels go for a couple hundred bucks in case u didnt know so just look for another type of steering wheel if ur not balling

i have one i may sell cheap if it doesnt look good with my tan interior
its the one with the airbag never deployed shoot me an offer if ur really interested

 

[suspendedHatch]

You can swap your Acura airbag onto a Civic steering wheel. It just takes a T40 torx bit. Virtually all Honda / Acura steering wheels are interchangeable as far as the teeth on the mainshaft go. The problem will lay with the airbag system and the horn wire.

If you just want to act JDM with a "Honda" logo in your Integra, just buy a used Civic airbag and swap it onto your wheel. They go for $60 used. Pretty lame though.

 

[Robreeto]

You can swap your Acura airbag onto a Civic steering wheel. It just takes a T40 torx bit. Virtually all Honda / Acura steering wheels are interchangeable as far as the teeth on the mainshaft go. The problem will lay with the airbag system and the horn wire.

If you just want to act JDM with a "Honda" logo in your Integra, just buy a used Civic airbag and swap it onto your wheel. They go for $60 used. Pretty lame though.

bahaha
thats what i wanna do!
xD

 

[Vtec-Pwr]

Do the jdm type r steering wheel, looks cleaner compare to usdm n jdm has 3 spoke => sportier n red "H" logo

 

[XslickwhitetegX]

My ukdm itr wheel has the H logo on it. Depending on the year the car it came out of, it either had red stitching or black.

Might add the ctr steering wheel won't fit teg, unless you swap out the steering colum, the spines are diffrent. The s2000 wheel will fit but its lots of work. All other wheels mentioned already itr srs and non srs are bolt in parts

 

[hondaproof]

will an ep3 wheel fit a da?