97tegkid
New Member
Alright so after getting the torque converter fixed in my integra I started just looking over everything and found that the control for the blower did nothing when turned to different fan speeds.
After looking around I found that the blower motor was unbolted and not even plugged in. Basically no fan and no motor was present either.
These plugs and wires were there and im wondering if anyone knows where they go or what they are
Location: Pass side right next to blower motor. You can see on the side the blue wires running down they run to the plug ontop of the blower motor housing
Location: Behind GloveBox
Thanks Ahead of time once again for everyones help
After looking around I found that the blower motor was unbolted and not even plugged in. Basically no fan and no motor was present either.
These plugs and wires were there and im wondering if anyone knows where they go or what they are
Location: Pass side right next to blower motor. You can see on the side the blue wires running down they run to the plug ontop of the blower motor housing
Location: Behind GloveBox
Thanks Ahead of time once again for everyones help