HELP!! Tegra' keeps dying out.

TexasTegra83

New Member
Hi. I Own A 95 Integra LS that i just actually finished working on and finally got running. Well sort of running. I really need help to figure out what is wrong with my car now. The car idles to low and kinda rough. But when i drive it and as long as im giving the car gas or if its in gear it drives fine. But heres my problem. When i go to shift and push in the clutch, my rpms drop down to almost zero and the car wants to die. I have to give the car gas just to keep the rpms up and for the car not to die. Eventually though i cant catch them and the needle drops to zero and the car dies. If anyone knows or has any solution to my problem. I would appreciate all the help. Thx.
 

MJ94gsr

New Member
Possibly a vacuum issue? all the lines hooked up? i've had vacuum issues mess with idle for me before, but it drove fine when u got the rpms up, and were moving.
 

TexasTegra83

New Member
hmm...im gon have to go back and chek my vaccum hoses thoroughly. But im pretty sure theyre all good. I had some people tell me that it might a timing issue. Any thoughts on it being something to do with my timing?
 


MJ94gsr

New Member
possibly timing, has the t-belt or water pump been replaced recently? How long has it been like this?
 

cooki3monstr

snarf
kind of sounds like when my tps wasnt plugged in. check the tps sensor on the throttle body for any loose connections
 

daf

New Member
If the idle sounds rough, its usually a gas or fire problem, so your timing may be off. You can also try adjusting the idle control screw on the throttle body. Its worth a shot, just dont go crazy with it.
________
ISRAELI RECIPES
 


Last edited:
You must log in or register to reply here.
Top