GSR to ITR Gauge Cluster

[gsr565]

Ok, did the swap, gas gauge is not working. Is the contacts not touching or is a re-pin needed? I don't have a diagram. If it is plug n play, then something else is not working. Any ideas?

 

[daf]

I am assuming your GSR gauge worked fine. You might want to check to make sure the plugs and pins look ok. Its not hard to bend those sometimes, and there also might be some corrosion. Other then that or a ecu issue, I dont know what to say.
________
Vapezilla vaporizers

 

[XslickwhitetegX]

swap out the green film! depending on what year the itr cluster came from you half to swap out the green film to make it work property, I did that when I had a usdm itr cluster, worked perfect!

 

[MugenDC2]

Mine is doing the same thing. Help!!!!!!!!! I will take pictures tomorrow.

 

[LiEkjAi]

did you already try switching the green film in the back? connectors all connects?

 

[g0tsh0p0w619]

The thing with switching the "green film" is that its very sensitive and if you damage anything you will be left with two bad guage cluster. But other than that they look really nice, I just got mines also like a few weeks ago.

 

[skoodles]

i have an itr cluster in my gsr.....but the idiot that had the car before me painted the needles green and they dont light up worth a crap at night. so ima have to sand them down or something. im hoping the needles are colored plastic and not just yellow film over them and ima try a dab of paint remover on them first.