gotgohan
Apprentice Mechanic
Alright I had to order a inverter for my Gauges that cover my cluster. I thought I knew how to do this I guess not. I hooked up the red wire to my positive switch on my fog light, and then hooked the black/red wire to a ground. On the dimmer to the inverter there are 2 wires and then an open spot. Is that open spot suppose to be grounded because I used my test light which was hooked to negative and hit that open spot and I can't see my gauges lighting up. I put the volt meter to each of the wires one is getting 12v and other is getting various voltage of positve depending on the dimmer. What am I doing wrong =(