mikeyc0828
New Member
the other day my car wouldnt turn over and the check engine light wouldnt turn off when the key was in acc. i jumped the ecu and the cel wouldnt flash or anything just stayed on. i took the cover off the fuel pump under the back seat and wiggled the harness that goes through the cover around and the cel turned off and the car started. today i go to start it and the cel turns off when the key is in acc but it will not start and i wiggled the wires again and it started. when the car doesnt start the fuel pressure is at 0 psi. is there anyway i can just hard wire a toggle switch to that harness or something? i really dont feel like dropping the tank and going through the wiring. or even just splice new wires in but i dont even know where those wires lead to? im not that much of a noob i just hate wires.