Finally going to slam the teg but wanted to know...

[Drifter3000]

Alright, here is the setup I am probably going to get: http://www.jhpusa.com/store/pc/viewPrd.asp?idcategory=252&idproduct=358
I was just wondering if I would need to buy anything else and does anyone know what a max drop coilovers can give me? Looking for a cheap camber kit (which Im pretty sure is required) but it needs to come in a set for front and back.

 

[patrick4588]

cheap camber kits suck. get a skunk2 pro one. the adjusting bolts are underneath so you wont ever have to worry about them hitting your shock towers (happened to me) and making holes.

 

[Spody02]

atleast get good ones in the front the back isnt as big as a deal
i have skunk 2 pro on the front, and the spc on the rear

reasoning, its front wheel drive, you want to make sure you got those wheels on the ground properly

 

[Drifter3000]

Anyone know if the Skunk 2's come in a pair? Or do I really even need camber on the back at all? I'll buy whatever is necessary to protect the tires from getting worn out to quick. 250$$ just for new front tires.

 

[Ominous G2]

They come in pairs, I just got a set this week. Got them from JHP also.

 

[Drifter3000]

Could I put these on myself?? Or should I have a mechanic do it??

 

[Drifter3000]

They come in pairs, I just got a set this week. Got them from JHP also.

Could you link me to the ones you bought. Because I can't find any that come in a pair. Its either front or rear. I want both in one purchase, lol.

 

[Ominous G2]

They don't usually come as front and rear. I thought you meant a pair as in both sides of the car. :lol:

 

[Samurai_Blue]

Could I put these on myself?? Or should I have a mechanic do it??

you can do it all by yourself, check my build thread and see what i went to to lower my car lol!

 

[Drifter3000]

do I really even need camber on the back at all? I'll buy whatever is necessary to protect the tires from getting worn out to quick. 250$$ just for new front tires.

 

[hatchoo]

cheap camber kits suck. get a skunk2 pro one. the adjusting bolts are underneath so you wont ever have to worry about them hitting your shock towers (happened to me) and making holes.

^^^happened to me too, i have holes in my shock towers. nothing i can do about it now

i did the washer trick on the back. i'm cheap, what can i say.

 

[hatchoo]

here you go:

http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=744