EP3 Seats

[kimbo]

hey, i'm thinking bout pikcing up some ep3 front seats and i was wondeirn if they are direct fitment without any modifications. this is also for a g3 teg. if anyone has any pics, could you please post. thanks.

 

[dc2GS-R]

they are not a direct fit. you will have to redrill holes on the floor to match the pattern on the EP3 brackets. they also sit up higher than the teggy seats. they look good though

 

[kimbo]

k, thanks alot

 

[Ominous G2]

Watch out for those seats, I drove a couple of those Si's. One time that bitch gave me a serious ball tap, because I forgot about the sides.

 

[kimbo]

Watch out for those seats, I drove a couple of those Si's. One time that bitch gave me a serious ball tap, because I forgot about the sides.

wait, i'm sort of confused, what do u mean?

 

[Ominous G2]

those seats sit nice and high on the sides, and they smashed my sack in a bad way.

 

[kimbo]

lol, it's all good

 

[obd1kenobi]

those seats sit nice and high on the sides, and they smashed my sack in a bad way.

lmfao, Owned by the seats! :lol:

 

[Ominous G2]

ohh it was terrible, sorta like euro trip. Error Error Error.

 

[kimbo]

just wondering if any of you guys have the write up on how to install these cause i coulnd't find it on honda-tech. thanks.

 

[kimbo]

anyone???

 

[RedIntegraGSR]

if i m not wrong there similar to the rsx seats so what you have to do is the front two bolts should bolt to the stock integra placements.. The only thing that you have to do is place the holes in a secure location on the floor for instance on a flat piece if possible and using a drill, drill a hole right through the bracket where it will sit and place a bolt there... and continue the process for the passenger side. It might be slightly different but i installed a pair of rsx seats into a teg and they are firm and look CRAZY Good Luck post some pics should look good with the color of your car..........Later

 

[dc2GS-R]

i think only one hole lines up and you have to redrill the rest. but i'm not positive

 

[cabezzzdb8]

THey sit too high for my taste,

 

[g3teg97]

Looks a lot thicker than the stock seats. The only ones I thought you could put in the teg were RSX, S2000 and del Sol seats.