Drivers side uppee control arm replacement help

[mikes92ls]

Ok so my bushing on the upper control arm on the drivers side was bad so I went out n bought a new one and I got the new upper control arm on but now im having trouble getting the hub to re-connect to it. What's going on should it be really hard to put back together? Any help is greatly appreciated

Here's a pic not the best but atleast something so you know what im talking about

 

[emd513]

You have to push down o. The arm to get the bLl join t stud threw. Its real easy I can do a complete upper arm change start to finish in under 15min. So either you have the wrong side arm or you didn't do something right. Also it looks in the pic that you have the stud cap still on that has to come off.

 

[emd513]

Forgot. If you pulled the hub to you, you possibly pulled the Cv joint out of its socket and will have to turn it left and right to get it to pop back in