Door Lock Problem fixed!

[mkornely89]

So here's the run down.
My door locks worked fine. I had a scytek alarm put in a couple years ago, it remotely locked and unlocked my door when i pressed the arm/disarm button on the remote. Everything worked fine. I took it out to get a better alarm.
Recently, I had the Clifford Matrix 50.5x security/Remote start alarm installed in my car. It worked fine for the first two weeks. It would lock/unlock my doors when I pressed the arm/disarm on the remote.
After the first two weeks, The arm/disarm button would arm/disarm the alarm, but it would not lock/unlock the doors.Also, the driver and passenger interior door lock switches STOPPED working completely. So, I had to lock the doors manually with the key outside my car. I took it back to the shop and all they could do was wire the alarm after the door lock module to make it work. Now, my doors would lock/unlock when i pressed the button on my transmitter, and the interior driver switch worked, but not the passenger. They said something was wrong with the door lock module.
I ended up ordering a used door lock module off ebay, put it in, and now everything works perfectly.
So if you are having a door lock problem, where your door switches inside the car dont work and your arm/disarm buttons on your car alarm transmitter are not locking/unlocking your doors, try going to this ebay store,http://stores.shop.ebay.com/HONDA-PARTS-UNLIMITED-INC__W0QQ_armrsZ1
order a door lock module, put it in yourself, and that might fix your problem

 

[dc2Fr3ak]

thanks alot for posting this bro...i was going crazy when mine stopped working not too long ago and havent had time to find take door panels off and investigate....ill be ordering mine ASAP...

 

[mkornely89]

I didnt want to write a ton, but I should add this:
Before I bought the door lock module off ebay, i took ym car to a Honda/Acura specialist. He tested all the inputs to teh door lock module, to make sure they were all working correctly. They were, so it had to be something inside the door lock module itself.
Before I took my car to the Acura specialist, I went back to my car audio shop and had them wire it back the way it should be (not after the door lock module). Because I knew the guy looking at it wouldnt be familiar with it. They actually just disconnected the alarm wires to the door lock wires completely. So after I hooked up my new door lock module, I had to go back to the car audio shop for them to wire the alarm to the door locks again, the correct way this time.
Everything works now the way it should so.