speedy2000ls
New Member
i came across this mod on THIS WEBSITE
it says it should add 3-5 hp not enough to feel but enough to register on the dyno.
i used:
10mil
12mil
dremel with cutting disc and sanding disc
1 hour
i had a little extra time so here it went.
after i cut the ribs off
here is after i sanded bown the rib cuts and made the rest of the cuts.
here is with the box back in and the filter in. you can see how much was cut out.
it says it should add 3-5 hp not enough to feel but enough to register on the dyno.
i used:
10mil
12mil
dremel with cutting disc and sanding disc
1 hour
i had a little extra time so here it went.
after i cut the ribs off
here is after i sanded bown the rib cuts and made the rest of the cuts.
here is with the box back in and the filter in. you can see how much was cut out.