coil grounding

lilsnel

New Member
Hey guys, Im new to this Integra club, but i have a problem i cant figure out. My 90 integra lost spark. I replaced the coil, capacitor module, cap and rotor. I have 12 volts to the coil when the wires arent landed on the coil, as soon as connect them my 12volts go away. The motor spins, the rotor is turning, yes i made sure the pistons are going up and down. I ohmed the new coil and it is within the ohm range it is supposed to be. I replaced the wires that go from the capacitor module to the coil. I am at a loss, anyone have any suggestions. Thanks ahead of time.
 
Top