check engine shift light

DC2 Racer

New Member
i`ve seen this done before.. and was wondering what do u need to do this.. making your check engine a shifter light.. anyone here in CI done this before.. and is there any D.I.Y. that anyone can post..
 

TegSox

Super Duper Moderator
What I've wanted to do is set it to go off at the right RPM so that I know when to shift and stay in the powerband, for racing. I'd set it for when I reach peak HP. Easier to just see the light blink on than to watch the tach, when you're going that fast.
It's a feature in Uberdata, but I haven't actually had it done yet.
 

deuce

New Member
TegSox said:
What I've wanted to do is set it to go off at the right RPM so that I know when to shift and stay in the powerband, for racing. I'd set it for when I reach peak HP. Easier to just see the light blink on than to watch the tach, when you're going that fast.
It's a feature in Uberdata, but I haven't actually had it done yet.
wow! reading this makes me really interested too! i'll also want a DIY if ne one has one hahaha
 

bongo667

New Member
Where there is a will, there is a way!!! Someone has to have done this.
 


Ominous G2

┌∩┐(◣_◢)┌∩┐
Ive thought about this, could put it in my cruise control spot since I took it out.
 

dc2GS-R

Super Moderator
rape your car more. you'll get used to the sound quick. i could tell exactly when to shift in my gsr without looking at it. i had just run through the gears enough to do it by sound. i'd hear VTEC, then secondary runners then a second later....perfect shift
 

speedin

The Transporter
just wire a high intensity led to be a shift light and make a hole in your cluster and slide it in!
 

dc2GS-R

Super Moderator
Ominous G2 said:
I dont rape my cars.
well i didn't mean drive it like you stole it. but you don't ever run through the gears? if you look at the power at the wheels multiplied by the gears and final drive, the best time to shift is at redline because the hp and torque peaks are so high
 
Top