Brake Light On!!!!!!

[DARGEN007]

I Have A 2000 Gs and sometimes The E-brake Light Sticks On, And I Notice That I Have A brake grind noise coming from pass/ side rear at low speeds, Does anyone think that It is just an adjustment with the hand brake cable, or is the calpier hanging up?

 

[patrick4588]

the light being on will be because you are low on brake fluid. try flushing and bleeding the brakes lines (all of them). I'm sure its time for some new fluid anyway! good luck

 

[dc2GS-R]

Water in the brake lines can cause it too

 

[DARGEN007]

Thanks for the info

 

[DARGEN007]

thanks for the info

 

[rebar71]

the light being on will be because you are low on brake fluid. try flushing and bleeding the brakes lines (all of them). I'm sure its time for some new fluid anyway! good luck

And the reason your brake fluid would be low, generally speaking, is because your pads are worn down. Another good indicator that your pads are worn is the "brake grind noise coming from pass/ side rear at low speeds."

So - check your pads!

 

[DARGEN007]

yeah I checkd the pads and they are right up against the rotor, but it seems that there is penty of meat on them, I would say I have about 1/4 inch or less left until it hits the wear clip