belt control unit beeping WTF?

[Goonmonster88]

so my automatic belts are stuck open and the belt control unit is beeping. When i put the manual belt in the seatbelt light on the dash flashes. there was a heavy rain yesterday and i do have a leak on the pasangerside dash. any help would be apreciated.

 

[Goonmonster88]

update

ok so i looked into it further and the green plug on the belt control unit has 3 corosion spont the yellow wire with the red stipe on it (12v pwr wire?)and the two wires right next to it kinda looks like this
[?}{12v}[?] those are corroded. so how do i fix this its only affecting the drivers side belt.

 

[jdmjim]

try unplugging it and plugging it back in

 

[13superD]

I have the same problem. Where is the control unit located?

 

[Goonmonster88]

belt control

its on the passenger side near the door under the side panel under the dash. so me and my dad were trying to figure out how to fix the problem and apparently you can open the plug and pop the individual terminals out with a paperclip. so im going to the junkyard soon to get the terminals. ill update when i get done ill try and get some pictures along the way too.

 

[13superD]

Thanks Goon...

 

[Goonmonster88]

starting to get anoyed

went to the junkyard today got a new clean plug swaped it out didnt fix the problem, took the belt control unit from my dads 93 teg and that still didnt fix the problem, so im starting to think the auto seat belt motor went out so any tips on fixing that?

 

[Goonmonster88]

hahahahaha

HAHAHAHAH ok so i did some more research and well acura/honda will fix any seatbelt problem under warrenty i guess i should have read the sticky about that