bearings help!!

[nate2302]

I've been searching and searching but i cant find any help on how to grease or replace my berings! If anyone could offer a site I would be greatful. Oh and by the way i have a 1992 1.8L acura integra.

 

[Samurai_Blue]

wheel bearing
rod bearing
main bearing
thrust bearing
which bearing

 

[nate2302]

sorry about that my wheel berings

 

[Samurai_Blue]

Ive had experience doing it yourself and i dont suggest it because they break down fast. Use a machine shop to press them in. Promise its worth it ive ran through 3 pairs and this last set is working because i used a press.

take off tire
take off caliper
take off rotor
undo the top ball joint on the camber kit may need a mallet to knock it free
undo the tie rod, may need mallet do undo it
then do the lower ball joint
shoot out the axle nut
buy the wheel bearings
go to the machine shop and press it in

reinstall.

 

[nate2302]

oooo yeah sounds like fun

 

[Samurai_Blue]

its not hard and its straight forward. I did that and put in ARP studs hung over in half a day dude its a walk in the park

 

[natt2000]

spelled bearings